- Standard Microsystems Single-Chip Ethernet Controller Specification Sheet

Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface
Datasheet
Revision 1.22 (09-25-08) 90 SMSC LAN9420/LAN9420i
DATASHEET
1 Wake Event Interrupt (WAKE_INT)
Indicates a valid MAC wakeup event (Wakeup Frame or Magic Packet) or
PHY interrupt (Energy-Detect) has been received. The particular source of
the interrupt can be determined by the WUPS field of the Power
Management Control Register (PMT_CTRL). Both WUPS bits must be
cleared in order to clear WAKE_INT. Writing to the WAKE_INT bit has no
effect.
RO 0b
0 DMAC Interrupt (DMAC_INT)
This interrupt is generated by the DMA controller. This bit is read-only. The
DMA interrupt is cleared by clearing the interrupt source in the
DMAC_STATUS DCSR. Writing to this bit has no effect.
RO 0b
BITS DESCRIPTION TYPE DEFAULT