User Manual

9 | SMSEagle NXS-9700-3G | User’s Manual
Your SMSEagle is designed so that you can set it up quickly and start using it right away. Follow the steps
below to get started.
STEP 1: Install 3G/4G antennas
ANTENNA INSTALLATION GUIDELINES
• Install antennas in a location with access to a cellular network radio signal.
• Antennas must be installed such that it provides a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with antenna from any other
transmitter.
• Antennas must not be installed inside metal cases.
• Make sure the SMSEagle antennas remain with 20cm spacing from each other.
Plug in both antenna connectors to the SMSEagle device.
STEP 2: Insert SIM Card
Please install SIM Card when the device is SWITCHED OFF. SIM Card slots is located at the bottom of the
device. Use a ball-pen or small screwdriver to eject SIM Card tray. Insert card into tray and push it gently into
slot.
STEP 3: Power the device
The device is powered with AC/DC power supply adaptor delivered in the box. The device needs a power
source of 12V DC / 1A. In order to power the device simply plug in a connector from AC/DC adaptor into the
device.
PREPARE FOR FIRST START