Manualshelf

User Manual

ManualsBrandsSnap Circuits ManualsElectronicsSnap Circuits Arcade Electronics Exploration Kit | Over 200 STEM Projects | 4-Color Project Manual | 20+ Build and Play Games | 35+ Snap Modules | Unlimited Fun
11121314151617181920
Project 15 Programmable Light Fan
Note that there is a 3-snap wire under the selector (S8) that is partially hidden. T
urn on
the slide switch (S1). The programmable fan (M8) spins and slowly displays messages.
Button Functions in NORMALMODE:
Button B (on S8) does nothing.
Erased messages can only be restored by re-entering them.
Button Functions in PROGRAMMODE:
Button B (on S8) does nothing.
Operation:
1. Use the slide switch (S1) to turn it on. The fan will display the message set last time.
If it’s the first time, the fan will display the initial set (these are subject to change):
1 SNAP CIRCUITS 2 ARCADE 3 BY ELENCO
4 LEARN BY DOING 5 FUN ELECTRONICS 6 YOUR PHRASE
2. To program the messages, press the “DOWN” button to select the phase and
program the message as per the following steps:
● Press & hold the “MODE” button to enter the “PROGRAM MODE”. When the
cursor is blinking, you can edit the first letter.
● Press the “UP” or “DOWN” button to find the letter you want. Hold the button
down to change letters faster.
● Each phase can contain 15 letters. Press the “MODE” button to edit the next space.
● Press & hold the “MODE” button to save the message and exit from editing mode.
3. If you want to edit another message, press the “DOWN” button and select the phase and repeat the above steps.
4. In NORMAL MODE, press & hold the “UP” button to
ERASE ALL MESSAGES. Turn off and on, it will not display any message until you program one.
5. Letters and marks available:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
★ , : !? . () @
◦
# + — × ÷ = ≠ $ ¥ € ₵ ₤ £ & 1 2 3 4 5 6 7 8 9 0 ◼ Remark: “◼” means space.
Note: After several hours of continuous use, the fan message may be erratic, not clear, or even have no display. Turn off for 5 minutes, and it will be back to normal again.
!
WARNING: Moving parts. Do not
touch the fan while it is spinning.
Button Controls Description
A (on S8) UP Press & hold to ERASEALLMESSAGES.
S2 MODE Press & hold to enter PROGRAM MODE.
C (on S8) DOWN Press to move to the next message.
Button Controls Description
A (on S8) UP
Press to find the letter you want upwards. Press & hold to find quickly.
S2 MODE
Press to move to the next space. Press & hold to save ready letters or exit.
C (on S8) DOWN
Press to find the letter you want downward. Press & hold to find quickly.
-17-