User's Manual
Table Of Contents
- 17 MARS-3102 User Manual_0904
- 17 MARS-3102 User Manual_0731
- Safety Information
- Contents
- Using This Manual
- Introduction
- Getting Started
- Navigation
- Scanner Operations
- OBD Direct Operations
- Component Test Operations
- Scope Multimeter Operations
- Ask-a-Tech Operations
- Information Operations
- Vehicle History Operations
- Data Manager Operations
- Help Operations
- System Settings Operations
- Maintenance
- Software License Agreement, North America
- Index
- 文件2
- 17 MARS-3102 User Manual_0731
- RF Exposure Information (SAR) CCS
6
Introduction Display Device
Operating Temperature Range (ambient):
At 0 to 90% relative humidity (non-condensing)
32 to 113°F
0 to 45°C
Storage Temperature (ambient):
At 0 to 70% relative humidity (non-condensing)
–4 to 140°F
–20 to 60°C
Environmental Conditions:
This product is intended for indoor use only
This product is rated for Pollution Degree 2 (normal conditions)
Power Supply:
Supply Rating; 19 VDC. 3.42A
2.1.3 Power Sources
Your Display Device can receive power from any of the following sources:
•
Internal Battery Pack
• AC/DC Power Supply
• Vehicle Power
• Docking Cradle (Optional)
Internal Battery Pack
The display unit can be powered from the internal rechargeable battery. A fully charged standard
battery provides sufficient power for about 4.5 hours of continuous operation. A LED on the front
of the unit indicates the battery state of charge.
AC/DC Power Supply
The display unit can be powered from a wall socket using the AC/DC power supply. The AC/DC
power supply also powers the internal battery pack charging process.
Vehicle Power
The display unit can be powered from a standard 12-volt power port on the test vehicle through a
direct cable connection. The vehicle power cable connects to the DC power supply port on the left
side of the display unit.
Docking Cradle (Optional)
The display unit can be powered and operated when installed on the optional docking cradle. The
docking cradle also powers the internal battery pack charging process and allows USB
connectivity for attaching peripherals. Contact your sale representative for additional details.