User's Manual
Table Of Contents
- 17 MARS-3102 User Manual_0904
- 17 MARS-3102 User Manual_0731
- Safety Information
- Contents
- Using This Manual
- Introduction
- Getting Started
- Navigation
- Scanner Operations
- OBD Direct Operations
- Component Test Operations
- Scope Multimeter Operations
- Ask-a-Tech Operations
- Information Operations
- Vehicle History Operations
- Data Manager Operations
- Help Operations
- System Settings Operations
- Maintenance
- Software License Agreement, North America
- Index
- 文件2
- 17 MARS-3102 User Manual_0731
- RF Exposure Information (SAR) CCS
57
OBD Direct Operations OBD Diagnose
MIL Status
This item is used to check the current condition of the Malfunction Indicator (MIL). Additional
information, such as which ECM commanded the MIL on and also the distance travelled while the
MIL is on (if supported), can also be displayed. It is also possible to print the MIL Status.
Fast-Track Troubleshooter
Fast-Track® Troubleshooter is a database of experience-based information of validated
real-world repair strategies that have been compiled by top-notch technicians since 1988. The
Troubleshooter system simplifies the diagnosis process, as it contains information on virtually all
common diagnostic trouble code (DTC) problems and driveability symptoms for most vehicles
covered by the vehicle communication software.
($01) Display Current Data
Use this item to display the current emission related data from the selected electronic control
module (ECM) of the vehicle. Displayed data includes analog inputs and outputs, digital inputs and
outputs, and system status information broadcast on the vehicle data stream.
($02) Display Freeze Frame Data
This item is used to display freeze fame data for any stored emission related diagnostic trouble
codes (DTC). In most cases the stored frame is the last DTC that occurred. Certain DTCs, those
that have a greater impact on vehicle emission, have a higher priority. In these cases, the highest
priority DTC is the one for which the freeze frame records are retained.
Freeze frame data includes a “snapshot” of critical parameter values at the time the DTC set.
($03) Display Trouble Codes
This is used to display any stored emission related DTCs reported by the various ECMs.
($04) Clear Emissions Related Data
This item is used to clear all emission related diagnostic data such as, DTCs, freeze frame data,
and test results from the memory of the selected ECM.
($05, 06, 07) Display Test param./Results
This selection opens a submenu of test parameters and test results form various sensors, such as
the oxygen sensor (O2S), monitor test results, and a record of DTCs detected during the last drive
cycle. The menu includes:
• Oxygen Sensor Monitoring ($05)
• Specific Monitored Systems ($06)
• DTCs Detected During Last Drive ($07)