User's Manual
Table Of Contents
- 17 MARS-3102 User Manual_0904
- 17 MARS-3102 User Manual_0731
- Safety Information
- Contents
- Using This Manual
- Introduction
- Getting Started
- Navigation
- Scanner Operations
- OBD Direct Operations
- Component Test Operations
- Scope Multimeter Operations
- Ask-a-Tech Operations
- Information Operations
- Vehicle History Operations
- Data Manager Operations
- Help Operations
- System Settings Operations
- Maintenance
- Software License Agreement, North America
- Index
- 文件2
- 17 MARS-3102 User Manual_0731
- RF Exposure Information (SAR) CCS
66
Component Test Operations Operations
3. Select a test option and the test screen displays (Figure 7-8).
Figure 7-8 Sample Test screen
4. Gesture sweep to view any additional information.
A scroll indicator displays momentarily along the right edge of the screen if there is additional
information below what is on the screen.
5. Select Back at any time to return to the previous screen, or select Exit to return to the main
component menu.
Hyperlinks
Component test screens contain hyperlinks that can either take you to another page containing
additional information or open an additional window on top of the current screen. Hyperlinks
display as buttons. Common hyperlinks are:
– View Meter—opens a live meter set up to perform the test in the lower portion of the
screen (
Figure 7-9). Once the meter view is open, the Component Test toolbar at the top
of the screen is replaced by the Scope Multimeter toolbar, which allows you to make
adjustments to the settings. See
Scope Multimeter Toolbar on page 75 for details.
– Show More Information—advances to a new screen with more detailed information
about a particular test, select Back to return to the test screen.
View Meter
A Meter button, which is only available in the Component Test view meter mode, appears on the
upper toolbar (
Figure 7-9).