User's Manual
Table Of Contents
- 17 MARS-3102 User Manual_0904
- 17 MARS-3102 User Manual_0731
- Safety Information
- Contents
- Using This Manual
- Introduction
- Getting Started
- Navigation
- Scanner Operations
- OBD Direct Operations
- Component Test Operations
- Scope Multimeter Operations
- Ask-a-Tech Operations
- Information Operations
- Vehicle History Operations
- Data Manager Operations
- Help Operations
- System Settings Operations
- Maintenance
- Software License Agreement, North America
- Index
- 文件2
- 17 MARS-3102 User Manual_0731
- RF Exposure Information (SAR) CCS
73
Scope Multimeter Operations Getting Started
Channel 3 Lead
Figure 8-6 Blue Channel 3 lead
The non-shielded blue lead (
Figure 8-6) is used for either Channel 3 or Digital Meter minus (–).
The lead color matches the color of socket 3 on the Display Device, as well as the color of trace 3
on the test screen.
Channel 4 Lead
Figure 8-7 Red Channel 4 lead
The non-shielded red lead (
Figure 8-7) is used for either Channel 4 or Digital Meter plus (+). The
lead color matches the color of socket 4 on the Display Device, as well as the color of trace 4 on
the test screen.
Alligator Clips
Figure 8-8 Alligator clip
Insulated alligator clips, colored to match each test lead, are included. A black clip for the common
ground lead is also supplied (
Figure 8-8). Each clip plugs into the straight end of a channel lead.
Test Probes
Figure 8-9 Test probe
Two test probes are included, one black and one red (
Figure 8-9). The test probes plug into the
straight end of the test leads.