User's Manual

Draft 4/14/15- Do Not Distribute
132
Data Manager Operations Scanner DataViewer Operation
Select from the following menu options:
• Text Only—shows all parameters and their values as text only
• Graphs Only—shows all parameters as graphs only
• Text and Graphs—shows all parameters and their values as text in the left panel of the
screen, and shows them as graphs in the right panel of the screen
Tools Menu
The Tools menu opens the Properties dialog box.
The Properties dialog box has two sections (Figure 12-13); Shared Graph Properties and
Individual Properties. Shared Graph Properties apply to all graphs and Individual Properties apply
to the selected graph only.
Figure 12-13 Properties dialog box
Properties dialog box selections include:
• Grid Lines—when selected, a line displays at each major division of the graphs.
• Display Item—use to view the display color of the listed items. Highlight an item and the
current color appears in the Color box.
• Change—use to change the color of the highlighted item, select to open a color palate.
• Sweep—use to adjust the number of data frames that appear on the screen (zoom in or out),
highlight and type in the desired number.
• Reset Colors—use to restore the default color settings.
• Data Item—use this pulldown menu to select individual graphs for modification.
• Auto Scale—minimum and maximum (Y axis) values automatically adjust to the signal when
the box is checked, uncheck the box if you want to custom set the values.
• Y Axis Range—use to type desired minimum (from) and maximum (to) values in the selection
boxes. This field is only active when Auto Scale is deselected.
• OK—applies the changes and closes the properties dialog box.
• Cancel—closes the properties dialog box without making changes.
• Apply—applies the changes and leaves the properties dialog box open.
NOTE:
i The Properties icon on each graph also opens the Properties dialog box (Figure 12-8).