User's Manual
![](/manual/snap-on-diagnostics/eems330/1-user-s-manual-english/images/img-54.png)
Draft 4/14/15- Do Not Distribute
150
SureTrack SureTrack Log In
Figure 15-4 SureTrack Website Login Page (Login fields and Remember Me check box)
4. Select Login. One of two results can be expected.
• Upon successful log in, you will be able to access SureTrack. If you were not able to log in,
verify and re-enter your username and password.
• If your SureTrack authorization code has expired, you will be automatically redirected to the
SureTrack authorization renewal page (Figure 15-5), proceed to step 5.
For additional SureTrack information, see the following sections: Using SureTrack in Scanner
Mode on page 151, Starting SureTrack from the Home Screen on page 154, and Using the
SureTrack Website on page 155.
5. If you have purchased a software upgrade, enter your NEW
SureTrack authorization code
(found on your sales receipt) (Figure 15-5).
– To use SureTrack you must have the current software upgrade installed on your
Diagnostic Tool. When you purchase a software upgrade from your Snap-on
Representative, you will receive a SureTrack authorization code.
6. Select Renew.
Figure 15-5 SureTrack Authorization Renewal Login Page