User's Manual

Draft 4/14/15- Do Not Distribute
151
SureTrack Using SureTrack in Scanner Mode
15.3 Using SureTrack in Scanner Mode
SureTrack repair information can be accessed while reviewing DTCs in Scanner Mode, to provide
you with diagnostic information specific to the DTC selected. Available DTCs are displayed in a list
that includes the DTC, a brief description, and a Fix It! icon (Figure 15-6).
Selecting the Fix It! icon provides the following SureTrack menu options:
• Common Replaced Parts Graph
• Dashboard Feature Information
Before using SureTrack, you must be logged in, see SureTrack Log In on page 149. If you are not
logged in to SureTrack, a message box will appear on the Display Codes screen (e.g.“SureTrack
Content May Be Available! Click here for more information.”). Selecting the message box will open
the SureTrack login page.
15.3.1 Common Replaced Parts Graph
The Common Replaced Parts graph (Figure 15-6) shows the percentage of verified fixes (using
the parts listed) derived from the total number of repairs by mileage. The example below indicates
that based on 41 repairs (intake airflow sensor replacement) involving vehicles with up to 200k
miles, approximately 33% of the repairs occurred at 125k miles. For additional information, see
“Common Replaced Parts Graph” on page 151.
Figure 15-6 Common Replaced Parts Graph
1— Common Replaced Part Graph icon—toggles Common Replaced Parts graph display
on/off.
2— Common Replaced Part Graph
3— Fix It! icon—opens Dashboard Feature Information


