User's Manual

Draft 4/14/15- Do Not Distribute
6
Introduction Features and Specifications
Built-in Stand
The built-in stand extends from the back of the Diagnostic Tool to allow hands-free viewing. The
stand clips into the Diagnostic Tool for storage and pivots out so the display is at a 45 degree angle
when in use.
Power Sources
Your Diagnostic Tool can receive power from any of the following sources:
• Internal Battery Pack
• AC/DC Power Supply
• Vehicle Power
• Docking Station (Optional)
Internal Battery Pack
The Diagnostic Tool can be powered from the internal rechargeable battery pack. A fully charged
standard battery pack provides sufficient power for about 5 hours of continuous operation. The
LED backlit power button indicates the battery status.
AC/DC Power Supply
The Diagnostic Tool can be powered from a standard AC outlet using the AC/DC power supply.
When connected to the Diagnostic Tool, the AC/DC power supply also recharges the internal
rechargeable battery pack.
Vehicle Power
The Diagnostic Tool can be powered from a standard 12VDC vehicle power port using the
Diagnostic Tool DC power port adapter. The DC power port adapter connects to the DC power
supply jack on the left side of the Diagnostic Tool.
Docking Station (Optional)
The Diagnostic Tool can be powered (when connected) by the optional docking station. When
connected to the docking station, the internal rechargeable battery pack is recharged. Contact
your sales representative for additional details.