User's Manual

Draft 4/14/15- Do Not Distribute

Scanner Function Basic Operation and Navigation

The Scanner toolbar is used to configure certain aspects of the displayed data and to exit. The

following sections explain how to use the toolbar.

Custom

The Custom icon on the Scanner Toolbar is used to determine which specific parameters display.

Minimizing the number of parameters on the data list allows you to focus on any suspicious or

symptom-specific data parameters. You can add or remove most parameters from the list. Any

parameter that has a lock icon next to it cannot be removed from the list.

IMPORTANT:

Limiting the number of parameters that display allows for a faster refresh rate of the data. A

smaller data lists also reduces the amount of memory used for saved files.

z To create a custom data list:

1. Select Custom on the Scanner Toolbar.

The parameter selection dialog box with all of the parameters selected opens (Figure 4-3).

2. Select the Deselect All icon to clear the highlights from the screen.

3. Create a custom data list by selecting the parameters to be included. Highlighting indicates a

parameter that displays, parameters that are not highlighted do not display.

Save

Saves a copy of the current frame of

data that can be viewed using Data

Manager.

Opens a standard Windows Print

dialog box for saving a print copy of the

current frame of data.

Opens a dropdown menu of the

additional options shown below.

Scale

Switches the scale values, displayed

along the left-hand side of the graphs,

on and off.

Sweep

Switches the sweep values, displayed

at the base of the graphs, on and off.

Table 4-1 Scanner toolbar icons (sheet 2 of 2)

Name Icon Description