User's Manual

Draft 4/14/15- Do Not Distribute
52
Scanner Function Stopping Communication and Exiting the Scanner
Certain live data parameter values display directly within the tip when performing Troubleshooter
tests and procedures. A tip may also contain a hyperlink to a Troubleshooter Reference, another
test or procedure, or a supplemental operation, such as Clear Codes. Hyperlinks are shown in
blue, and selecting them opens the link. Troubleshooter References open in a separate window.
(Figure 4-29).
1— Live data values
2— Hyperlink
Figure 4-29 Sample data values within a Troubleshooter tip
4.4 Stopping Communication and Exiting the Scanner
The Scanner remains open as long as there is an active communication link with the vehicle. You
must first stop communication with the vehicle in order to exit from the Scanner function. A
warning message displays if you attempt to exit from the Scanner while it is communicating with
the vehicle ECM.
NOTE:
i Damage to the vehicle electronic control module (ECM) may occur if communication is disrupted.
Make sure the data cable and the USB cable are properly connected at all times during testing.
Exit all tests before disconnecting the test cable or turning off the tool.

