User's Manual

Draft 4/14/15- Do Not Distribute
56
Scan Module Operation Checking Scan Module Paired Status
A search in progress message displays during the pairing procedure (Figure 5-3), the Paired
Devices screen (Figure 5-4) displays once the procedure completes.
Figure 5-3 Sample pairing in progress message
7. Select the Home icon on the Toolbar.
8. Disconnect the data cable from the vehicle.
The Scan Module and Diagnostic Tool are now paired for wireless communication and should
automatically recognize each other when both are powered up.
5.3 Checking Scan Module Paired Status
z To check if the Scan Module is paired to your Diagnostic Tool:
1. Select System Settings > Paired Devices.
The paired devices screen opens (Figure 5-4).
The Paired Devices screen lists all of the devices paired to the Diagnostic Tool, and also indicates
whether or not there is active communication occurring.
Figure 5-4 Typical Paired Devices screen
2. Verify the Scan Module is in the list of paired devices.