User's Manual

Draft 4/14/15- Do Not Distribute
90
Scope and Multimeter Operations Getting Started
Inductive RPM Pickup Adapter (optional)
Figure 8-11 Inductive RPM Pickup adapter
The optional Inductive RPM Pickup adapter (Figure 8-11) connects to the scope auxiliary
connector of the Diagnostic Tool with a DB9F plug. It can be used to trigger a waveform or display
RPM. With the Ignition Scope, the RPM Pickup connects to cylinder number one to establish the
firing order.
Low Amp Current Probe (optional)
The optional Low Amp Current Probe provides accurate and reliable non-intrusive testing of
ignition coils, fuel injectors, fuel pumps, relays, electric motors, and parasitic draw. The optional
Low Amp Current Probe measures current from 10 mA to 60 Amps.
Figure 8-12 Low Amp Current Probe
8.2.3 Menu Options, Scope Multimeter
The Menu icon on the Toolbar at the base of the screen opens a menu with the following options:
• Safety Information—opens the Important Safety Instructions document.
• File—allows you to print or save the data or meter setup being viewed.
• Setup—allows you to adjust certain tool settings once a test has been selected.
• Help—allows you to view supporting documentation.
File
Use to print or save a copy of the data currently being viewed. Selecting opens a submenu:
• Save Multimeter—opens an additional submenu with these options:
– Save Configuration—saves the current screen setup as a preset for quick access.
– Save Single Frame—saves a recording of the current screen.
– Save All Frames—saves a recording of the current screen plus all the data in the buffer.
• Print—opens a standard Windows Print dialog box for printing the current screen.