User's Manual

Draft 4/14/15- Do Not Distribute
91
Scope and Multimeter Operations Navigation
Setup
This option allows you to adjust tool settings to your personal preferences. Selecting opens a
menu of the following:
• Unit Setup—opens the Unit Setup dialog box to adjust trace and display settings
• Snapshot—opens the Snapshot dialog box for selecting how triggered data is saved.
• Ignition—opens the Ignition dialog box for setting up to display secondary ignition patterns.
Help
A variety of utilities and additional resources are available through the Help menu:
• User Manual
• Version Info
• Activation Status
• Scope About
The User Manual, Version Info, and Activation Status options are the same as explained
previously, see Menu Options on page 20 for details.
Scope About
This option opens a dialog box that contains the software version and other specific details about
the Scope module.
8.3 Navigation
The following section describes how to navigate the screen interface.
8.3.1 Screen Layout
The screens typically include the following sections (Figure 8-13):
• Scope Multimeter Toolbar—allows you to configure the tool for the type of test and to adjust
the settings for each channel, or trace.
• Main Body of the screen—displays test results. Options on the toolbar let you select how
tests display on the screen.
• Trace Details—displays trace settings, which can be adjusted or switched through the touch
screen.
• Record/Playback Control Toolbar—allows you to record and navigate through paused data.