Product Manual

TROUBLESHOOTING GUIDE
21
Problem Probable Cause Solution
Motor stops suddenly
1. Extension cord is too
long or wire size too
small.
2. Thermal safety switch
has tripped due to
overheating and over-
work.
1. Remove extension
cord or use proper
extension cord (See
instructions).
2. Make sure main supply
voltage corresponds to
specifications. Allow to
cool and restart unit.
Unit will not stop when
trigger is released
1. Gun/Hose Assembly is
defective.
1. Remove Wand from
the Gun and squeeze
trigger to ensure that
the water is coming
out of the front of the
Gun at a rate equal to
the Garden Hose. Call
Customer Service:
1-888-278-8092.
Unit begins to smoke
1. Overheated, over-
loaded or damaged
motor.
1. Turn off unit and Call
Customer Service:
1-888-278-8092.
Trigger will not move
1. Gun Safety Lock in
engaged.
1. Release Safety Lock
(See instructions).
Gun/Hose - Leaking water
1. Loose fitting. 1. Tighten fittings. If per-
sists, Gun/Hose will
need to be replaced.
Call Customer Service:
1-888-278-8092.
Pump is noisy
1. Pump is sucking air. 1. Make sure hoses and
fittings are air tight.
Turn off machine and
purge pump by
squeezing trigger gun
until a steady flow of
water emerges through
the nozzle.