Product Description

This equipment should be installed and operated with minimum distance 15cm between
Wireless Charge Base
□ECFLPRA0 □ECFLPRA0
Base de carga inalámbrica
Product Details:
■ Wireless dynamic charging system allow partial recharging.
■ Only work with Snap-on wireless lamps and accessories.
■ Recharge using the bi-directional USB-C connection.
■ Equipped with built-in magnets.
■ Charge external devices with built-in USB charging port, output: DC5V 1A.
■ Pack delivered with 5V 3.5A charger, Input: AC100-240V, Output: DC5V 3.5A
Product Description:
Descripción del producto：
Replacement Parts:
■ ECFLPRA0-7 - 5V 3.5A USB-C Charger
Warranty/Service:
■ 1 year warranty covering defects in material and workmanship
■ For service, please send to the appropriate repair center below
Western Repair Center (USA)
3602 Challenger Way
Carson City, NV 89706-0753
USA
Toll Free # - USA only:
[phone]
Telephone: [phone]
Fax: [phone]
Northern Repair Center (USA)
3011 E. RT 176, Dock 8
Crystal Lake, IL 60014
USA
Toll Free # - USA only:
[phone]
Telephone: [phone]
Fax: [phone]
Eastern Repair Center (USA)
6320 Flank Dr.
Harrisburg, PA 17112
USA
Toll Free # - USA only:
[phone]
Telephone: [phone]
Fax: [phone]
■ ECFLPRA0-7 - 5V 3.5A Cargador USB -C
Datos del producto:：
■ El sistema de carga dinámica inalámbrico permite la recarga parcial.
■ Funciona solamente con lámparas y accesorios inalámbricos Snap-on.
■ Recárguela con la conexión USB-C bidireccional.
■ Equipado con imanes integrados.
■ Cargue dispositivos externos con el puerto de carga USB incorporado,
Salida: 5Vcc 1A
■ El paquete incluye cargador USB-C de 5V 3.5A; Entrada: 100-240Vca;
Salida: 5Vcc 3.5A
Made in China
Snap-on and wrench "S" are trademarks of Snap-on Incorporated.
©2019 Snap-on Incorporated.
Printed in China
Snap-on, 2801 80th St., Kenosha, WI 53143
www.snapon.com
Hecho en China
Snap-on y la Wrench “S” son marcas registradas de Snap-on Incorporated.
©2019 Snap-on Incorporated.
Impreso en China
Snap-on, 2801 80th St., Kenosha, WI 53143
www.snapon.com
■ Do not use the wireless charging base near open flames.
■ Do not charge the wireless smartphones.
Piezas de remplazo:
Garantía/ Servicio:
■ 1 año de garantía que cubre defectos en materiales y mano deobra
■ Para el servicio, por favor envíe al centro de reparación adecuada a continuación
Centro de Reparación del Oeste (EE.UU.)
3602 Challenger Way
Ciudad de Carson, NV 89706-0753
EE.UU.
Teléfono Gratuito # - sólo EE.UU.
[phone]
Teléfono: [phone]
Fax: [phone]
Centro de Reparación del Este (EE.UU.)
6320 Flank Dr.
Harrisburg, PA 17112
EE.UU.
Teléfono Gratuito # - sólo EE.UU.
[phone]
Teléfono: [phone]
Fax: [phone]
Centro de Reparación del Norte (EE.UU.)
3011 E. RT 176, Dock 8
Crystal Lake, IL 60014
EE.UU.
Teléfono Gratuito # - sólo EE.UU.
[phone]
Teléfono: [phone]
Fax: [phone]
■ No uses la base de carga inalámbrica cerca de llamas abiertas.
■ No cargue los smartphones inalámbricos.
.
Charge
Magnet
Magnet
Bolt hole
Input
Output Port
Carga
Imán
Imán
Orificio para perno
Entrad
Puerto de
salida
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
the radiator& your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.