Manualshelf

Instructions / Assembly

ManualsBrandsSnapFence ManualsFencing3 ft. W x 4 ft. H White Vinyl Multi-Use Adjustable Fence Gate
12
GATE KIT COMPLETE INSTRUCTIONS
Part Number: GK-4
Directions for constructing and installing your SnapFence
®
Gate Kit
SnapFence
®
Gate Kit
Gate Kit - Complete / Multi-Use Garden, Pet and Play Gate
A2
B
B
A2
A
A
C
D
F
I
L
L
M
E
46”
Attach
Wire or
Lattice of
your choosing.
Size: Up to 3’ wide
and 4’ high.
Customizable:
Rails and Posts
can be easily cut
to t any size
opening.
Can be attached to:
Wood
Masonry
Vinyl
T-Post
U-Post
SnapFence
®
1
Open package and separate parts.
Gate panel may not use all parts listed.
2
Build the Gate
• Lay out the parts as shown in the diagram. Begin to attach
components.
• Using a small hammer or rubber mallet, lightly tap the
components together.
2.1
Gate Corners
• Attach Gate Corners (D) to gate structure (A2 and B) by
sliding corners into the Posts/Rails. Make sure the holes
on the hinge side Gate Corners (D1 and D2), face up and
down, and the holes on the latch side Gate Corners (D3
and D4) face outward.
3
Attaching Upright Posts
• Attach the Hinge Brackets (C) to any existing SnapFence
®
system (extra posts will not be needed).
• Attach to U-post using zip ties (not included) or attach to the the
U-post using screws.
• Attach to masonry by simply drilling through the post (A) using
Red Head bolts (not included).
• Attach to existing vinyl by simply drilling the the post (A) and
using lag bolts (not included).
• Attach to existing wood by simply drilling the the post (A)
and using lag bolts (not included). The hinge bracket (C) will
t directly onto the edge of 2x4 wood, simply screw the hinge
bracket (C) into the wood using the enclosed screws.
(2) 46” Rails
(2) 34” Posts
(2) 38” Rails
B
A
A2
(C) 2 Hinge
Brackets
(M) 1 Mounting
Plate
(D) 4 Hinge
Elbows
(L) 2 Gate
Stops
(E) 2 Support
Brackets
(I) 1 Latch
Slide
(F) 2 Post
Caps
1 Bag of
Screws
.
A2
B
B
A2
D1
D2
D3
D4
38”
34”
Gate
Posts (A) need to be
trimmed 4”
to allow corner ttings to
make a nal height of 46”
.
A2
B
B
A2
D1
D2
D3
D4
38”
34”
Assembled
Frame
holes face up/down on
side to be hinged
holes face outward on
non-hinged side

Summary of content (2 pages)