User Manual

ManualsBrandsSnapFresh ManualsImpact Wrenches20V Brushless Cordless Impact Wrench Kit 1/2” Hog Ring Anvil w/ 265 ft-lb High Torque Variable , 2300 RPM Speed, Include 2.0 Ah Li-ion Battery, Fast Charger, 4 Pcs Sockets, Carry Bag - SnapFresh

TECHNICAL SPECIFICATION

0-2300 rpm

0-3200 bpmImpact rate

Max torque

Drive

Sound power level

Sound pressure level

1/2" hex chuck

Includes

LED light, soft grip, variable

speed and electric brake.

280 Nm

LpA: 91.7 dB (A) k=3dB(A)

LwA: 102.7 dB (A) k=3dB(A)

Vibration level 1.5 m/s²

Accessory

1/2” SOCKETS 17，19，21，

23MM

OPERATION

Charging the battery

The battery pack for this tool has been shipped in a low charge condition and must be fully charged before the

first use. To obtain maximum energy, ensure the batteries are fully discharged of all power before recharging for the

first 5 or 6 charges. The batteries must also be charged for a full hour during this time.

. Remove the battery pack from the wrench. To do this press both battery release buttons simultaneously and pull

down.

. Place the charging stand onto a bench or table near a power supply point.

. Push the charging plug of the AC adaptor into the battery.

. Connect the AC adaptor to the power supply point. The light will be red when the unit is plugged in and during the

battery pack is being charged.

. When the battery is fully charged, the red light turns to green.

Model No.

BBT-POB06

Rated voltage

No load speed

20V

Model Number BBT-DC20A

Battery type Lithium-ion

Voltage

20V

Capacity 2.0 Ah

Recommended charger BBT-YFT20V

Weight 0.3 kg

Model Number BBT-YFT20V

Charger input 100-120V~60Hz 65W

Charger output

21V 2.5A

Charging time 2Ah battery 60 minutes

Charging time 4Ah battery 120 minutes

Recommended batteries

BBT-DC20A, BBT-DC40A

Weight 0.36 kg