Instructions

Snapmaker Enclosure
|
37
How to Use
When the machine is not under a 3D printing, laser or CNC process, the LED Strips and the
Exhaust Fan can be controlled by entering Home -> Enclosure -> LED Strip or Exhaust Fan
on the touchscreen.
Before starting a 3D printing, laser or CNC process, it’s recommended to switch ON the
LED Strips for a better vision on the work status.
Before using the laser function, it’s recommended to switch ON the Exhaust Fan to
expel the waste gas coming from the laser.
Before using the CNC function, it’s recommended to switch OFF the Exhaust Fan to
avoid raising the dust in the enclosure.
3.1 LED Strips & Exhaust Fan
Guides & Pictures / Snapmaker