A350 - Troubleshooting-Guide

06
|
Hardware
3. Fix the end-stopswitchon your TRIGGERED Linear Module.
3.1 Disassemblethe cover(the onewithno cable end) of the Linear Module.You will need the 2.5 & 2.0 hex
screwdriver.
3.2 Find the end-stop switch.Check if it's stuck.
3.3Tap the end-stop switchand re-assemble the Linear Module.
4. Check if the Linear Module works. If not, replacing the Linear Module might solve the problem.
Slider(Carriage) of Linear ModuleComesLoose
Actions
1. Takethe cover (the one with no cable attached) off from the Linear Module.You will need the 2.5 & 2.0 hex
screwdriver.