A350 - Troubleshooting-Guide
|
19
2. If the problem persists, replacing the 3D Printing Module might solve the problem.
Heated Bed Won't Heat up
The Heated Bed won't heat up when you set the target temperature on the Touchscreen or when you start a
print.
Possible Causes
• The cable of the Heated Bed is broken.
•
The thermistor of the Heated Bed is open- or short-circuited.
•
The Heated Bed is open-circuited.
•
The Heated Bed port on the Controller is broken.
Actions
1. Examine thecable of the Heated Bed, and see if it's damaged in any way. If it is, you might need to replace the
Heated Bed.