Quick Start Guide

c. Click Connect in the popup of the touch screen.
4.3.2 Generate the G code
1. Click on the upper left corner of the workspace to return to the home page, and then select and
enter the 3D print G code generator.
2. Follow the Luban prompts to complete the novice boot. During this process, the Luban automatically
loads the built-in cases and generates the G code.
If the novice guide does not automatically pop up or exits unexpectedly, click the
menu bar Help> the novice guide.
You can also upload your own file by clicking on the file and configure the
parameters for it.
3. After G code is generated, click Export in the bottom right corner of the page> to load G code into the
workspace.
4.3.3 Start the first printing process
In the preview window that is popup in the workspace, click on Start Job> Online Job in the lower right corner
to start your first print! If the Wi-Fi connection is unstable or disconnected during printing, the printing task is
not affected.