Quick Start Guide

• Flammable and explosive substances may cause a fire. Therefore, before using the laser module,
remove all the flammable and explosive substances around the machine, and in the working area; while using
the laser module, ensure to be free of any flammable and explosive substances around the machine and in the
working area.
• It is strictly prohibited to use the laser module with the 3D printing platform, CNC carving and cutting
platform (except for four-axis operation scenarios), otherwise it will damage the work platform, and may even
cause fire or other hazards.
1.3.4 CNC security information
• Users of the CNC module should be at least 18 years old and have relevant experience.
• The CNC modules shall be used in the outer cover, and both users and bystanders shall wear the CNC
goggles.
• Before CNC operation, keep the materials safely; during CNC operation.
• If the tool and machining parts encounter lag or other blocked conditions, please press the emergency
stop switch or shutdown immediately. The tools and machining can not be processed until the moving parts
stop moving and the wiring is removed.
• After CNC operation, do not avoid scald by touching the tool and clamp by hand.
• If some materials themselves contain toxic substances, processing using CNC modules may release
them. To reduce damage, use air purification filters or use CNC modules with good ventilation, and take safety
measures (such as wearing a mask).
1.3.5 Cover security information
• To move the cover or machine position, be sure to separate the machine from the cover.
• Do not scratch, bend, or break acrylic plates, profiles, and door handles that may reduce the protective
properties of the cover, cause permanent damage to the cover, and cause personal injury.
• Do not place the integrated controller in the outer enclosure when using this product.
• The maximum load-bearing capacity of the outer cover top plate is 7kg. Do not place items beyond this
weight on the roof, otherwise product damage.
• Do not put any items or body parts near or into the exhaust fan when it is in operation.
• When the exhaust fan is in operation, all the wires must be placed away from the exhaust fan blade to
avoid damage to the exhaust fan and other parts of the outer cover.
1.3.6 Emergency measures
Burns caused by high-temperature surfaces
Touching high-temperature surfaces (including high-temperature nozzles, hot ends, hot beds, glass-printed
plates, and uncured consumables) can burn the skin. If you are accidentally burned, please take the following
measures promptly:
1. Stay away from heat sources;
2. Immediately rinse the burn area with running cold water;
3. Remove any clothing or jewelry near the burn area;
4. Wear the burns with clean, dry bandages;
5. If necessary, use painkillers or seek medical attention immediately.
Inhaling of smoke and particles
• Printing certain consumables, laser operations, or CNC operations may emit or produce smoke and
particles that may stimulate the respiratory system. Therefore, we recommend that you go with air purification