Quick Start Guide
Table Of Contents
- 1 Before the start
- 2 Machine assembly
- 3 Cover assembly and use
- 4 The 3D printing
- 5 Laser engraving and cutting
- 6 CNC carving and cutting
- 7 Maintenance and maintenance
You can also find the process entry through the following path: Set up> Module
Assistant> Module replacement.
You can also turn off the power switch of the machine before replacing the
module, remove, or add an extended component.
Firmware update
You can upgrade the firmware via the Wi-Fi or U disk. When a new firmware exists, the touch screen displays
an update prompt after the connection. We recommend timely upgrading the firmware to the latest version.
By using the Wi-Fi:
1. Connect the machine to the Wi-Fi;
2. On the touch screen, click Settings> Firmware Update;
3. If a new firmware appears, click to download now;
4. When the firmware download is complete, click Update now.
Through the U disk drive:
1. In Snapmaker, in the navigation bar of the official website, click on Support> Product Support>
Snapmaker Artisan> firmware, download the latest firmware, and save it to the U disk;
2. Insert the U disk into the integrated controller;
3. On the touch screen, click Settings> Firmware Update> Local Update;
4. Select the firmware package file, and then click Update.