Quick Start Guide

touch screen, as follows:
a. Turn off the power supply of the machine and replace the execution head with
a 3D printing module or a CNC module;
b. Restart the machine, click Settings> on the touch screen to view the serial
number of the machine.
Red laser emitter is a second class laser product, do not look at the machine
light.
After each disassembly of the module or machine, the material thickness
measurement and calibration should be carried out again.
2. Camera calibration
function Introduction:
The 10W laser module has a built-in HD wide-angle camera and can be used to capture images of the working
area, generating a background for editing the laser carving and cutting objects.
Calibration principle:
The camera calibration adjusts the mapping of the captured image to the actual platform, so that the image
can get a normal image. During the calibration, the machine cuts a square on the white paper and completes
the calibration by capturing the image of the square.
New era calibration is required after assembling the module or machine each
time.
You can fix the white paper with the pressing block that we provide:
5.2.3 Fixed materials
Remove the linden wood in the material pack and place it on the laser engraving and cutting platform. As
shown in the figure below, use four pressure blocks against the four sides of the lime wood board, and then