Quick Start Guide
Table Of Contents
- 1 Before the start
- 2 Machine assembly
- 3 Cover assembly and use
- 4 The 3D printing
- 5 Laser engraving and cutting
- 6 CNC carving and cutting
- 7 Maintenance and maintenance
5.3 Start the work
5.3.1 Install the Snapmaker Luban
1. Select software in the navigation bar of Snapmaker website to download and install our supporting
software Snapmaker Luban (Luban).
2. Start Luban, select the language, machine model, and module type, then, under the Configuration wizard,
and click Finish.
All of these settings can be changed in Settings> Preferences Settings on the
menu bar.
3. Make sure that your computer is connected to the same Wi-Fi as the machine, and then connect the
Luban to the machine by:
a. Enter the workspace from the home page and select Wi-Fi in the connection panel in the top left
corner.
b. Click Refresh, select your machine from the drop-down list, and then click Connect.
c. Click Connect in the popup of the touch screen.