Quick Start Guide

filters or use this product with good ventilation. Wear a protective mask when necessary.
• If similar symptoms such as respiratory irritation occur, be sure to let the patient breathe fresh air
immediately, and arrange for medical treatment in time.
Contact with irritating substances
Certain soluble consumables may be irritating to the human body. When contacting such consumables,
always consult the Safety Data Sheet (SDS) provided by its manufacturer and take appropriate safety
measures.
1.4 Safety Icon
Label icon
Warning content
position
Be careful of the hot surfaces.
Do not touch the high temperature surface by hand
during or without cooling after printing. Please wait
until the surface has cooled completely before
touching, or use aids such as insulation gloves.
On the 3D printing module,
glass printing board and heated
bed
Be careful to tie your hands.
When operating the CNC module, do not touch the
sharp knife head directly with your hand to avoid
being pricked.
On the CNC, on the module
Be careful to hold hands.
When the machine moving parts move, do not touch
or block them with your hand to avoid being hurt.
On a 3D print module
Be careful, and it may be potentially dangerous.
On glass board and hot bed
Do not touch the surface during printing, or without
cooling after the printing ends.
On glass board and hot bed
Glass printing board is fragile items, please take it
carefully. After being removed, it should be placed in
a safe area.
On the glass print board
Do not print directly on this surface, or it will damage
the hot bed.
In a hot bed
Do not unplug or plug the hot bed cable under power
supply.
On the hot bed cable line