Quick Start Guide

• The material is colored in red or black
• There are hollow holes in the middle of the material
The Luban provides three laser-focus modes. You can follow the instructions in
this instruction by using the automatic thickness measurement mode, which is
the most convenient and quick. You can also choose another mode to start jobs
depending on the situation:
• Input material thickness: If the material thickness is known, you can enter
the material thickness by yourself.
• Use Work Origin: In this mode, you need to manually focus and set the
work origin. Please read the online user manual to understand the operation
method before operating.
3. After waiting for laser engraving and cutting, open the cover door and remove the finished product.
This manual introduces the camera capture method, and you can also choose to
use the working origin method to determine the laser working position.
In addition to the online job process described in this manual, you can also use
USB, to connect the Luban to the machine, or send G code files to the machine
through U disk copy, Wi-Fi transmission, etc., and then start the job on the touch
screen.
For more operational details, please refer to our online user manual: In the
navigation bar of Snapmaker, official website, click Support> Product Support>
Snapmaker Artisan> User manual.