Quick Start Guide
Table Of Contents
- 1 Before the start
- 2 Machine assembly
- 3 Cover assembly and use
- 4 The 3D printing
- 5 Laser engraving and cutting
- 6 CNC carving and cutting
- 7 Maintenance and maintenance
6.2 Preparations
6.2.1, Initialize the settings
1. Turn on the power switch on the back of the controller and start the machine.
To restart the machine, wait at least five seconds without power before starting
again.
2. Do the machine setup. Follow the instructions on the touch screen by following: Read the Terms of Use>
Select Language> Naming Machines> Connect to Wi-Fi.
Machine settings are only present on the first boot-up. To change the above
settings, click Settings on the touchscreen home interface, and then click Wi-Fi,
language, or about the machine as necessary.