Quick Start Guide
Table Of Contents
- 1 Before the start
- 2 Machine assembly
- 3 Cover assembly and use
- 4 The 3D printing
- 5 Laser engraving and cutting
- 6 CNC carving and cutting
- 7 Maintenance and maintenance
3. Be familiar with the initial setting of the CNC operation by following the instructions on the touch screen.
6.2.2 Fixed materials
1. Place the supplied material in the center of the CNC carving and cutting platform.
2. Install the fixture on the CNC carving and cutting platform, and then tighten the plum blossom knob to
secure the material.
Our built-in case size is the 152.2mm 123.9mm. Make sure that the clamp does
not interfere with the CNC