Quick Start Guide

Laser emitted from the hole.
Do not touch the laser light out hole. Do not expose
your eyes and skin to direct or reflected light.
On the laser module
Laser product grade is grade 4.
Do not expose your eyes and skin to direct or
reflected light.
On the laser module
Laser product grade is Grade 1.
Do not expose the eyes and the skin to direct or
reflected light when the open and closing state of the
mask and the laser emission state is invalid.
On the outer cover door
The maximum load-bearing capacity of the outer
cover top plate is 7kg.
Do not place items beyond this weight on the roof,
otherwise it will damage the roof.
On the outer cover roof
* The actual drawings appearing in this manual take the safety certification label in the European Union as an
example.
* The colors and materials of the same icon may vary in different locations.
1.5 Specification and parameters
Machine & Cover
Dimensions (length, width, and
height)
Machine only: 620mm 580mm 634mm
Machine & cover (including double side frame and duct connector):
995mm 849mm 705mm
Minimum footprint: 1690mm 1035mm 705mm
rough weight
Box A: 34.8kg
Box B: 31.5kg
net weight
52.9kg
material
Body & outer cover profile: aluminum alloy
Paneling: acrylic board
Supported software
Snapmaker Luban and the third-party slicing software
File transmission mode
Wi-Fi, USB cable, U disk