Quick Start Guide
Table Of Contents
- 1 Before the start
- 2 Machine assembly
- 3 Cover assembly and use
- 4 The 3D printing
- 5 Laser engraving and cutting
- 6 CNC carving and cutting
- 7 Maintenance and maintenance
How to set up the working origin
1. After the G code file is sent successfully sent, click Start> File> Local on the touch screen, select the
received G code file, and then click Next.
2. Click X-, X +, Y-, Y +, Z-, and Z + to move the CNC tool to the working origin (in this example, the
midpoint of the model corresponds to the coordinate origin of the software). The distance between the CNC
tool and the material surface is now about 5mm.
3. Place the calibration card or a piece of A4 paper between the CNC tool and the material. Adjust the
height of the CNC tool constantly through the Z- / Z + button until you feel a slight resistance when pulling the
calibration card and see the card fold when pushing. Click on Set XYZ Origin.