Quick Start Guide

1. Prepare the cleaning tools: wipe the cloth, clean water;
2. Ensure that the machine is powered off and that the power switch is turned off;
3. Dip in the wipe cloth with the appropriate amount of water, wipe away the residual solid glue on the glass
printing board;
If it is difficult to remove the solid glue, you can click on the Control> Hot bed on
the touch screen and heat the hot bed to 50℃ before trying to erase it. It is
recommended to wear gloves during operation to avoid hot temperature.
4. Wipe off to the plate surface without solid glue residue, namely complete cleaning.
Remove the grease and dust
Maintain the scene
When the skin of human hands or other parts touches the glass printing board, it may leave a small amount
of natural oil on the plate surface; part of the air dust will also adhere to the printing board. Over time, the
adhesion effect of the first layer of the printing board may be affected.
Maintenance frequency
At least once a month.
Maintenance method
1. Prepare the cleaning tools: wipe the cloth and clean water
2. Dip with a wipe cloth in the right amount of water, gently wipe the surface of the glass printing board;
3. Wipe to the plate surface without obvious grease, dust or other stains, namely complete cleaning.