Quick Start Guide

Cotton swabs are a disposable item. If there is still dust or oil on the protective
lens after wiping, please take a new cotton swab and wipe it again.
4. Wipe to the surface of the protective lens without dust, no oil stains, no water stains, that is, to complete
the cleaning.
We include a spare laser lens shield. If the original laser lens shield is damaged,
replace the guidelines in the online user manual: in Snapmaker, the navigation
bar of the official website, click Support> Product Support> Artisan> User
manual.
7.3 CNC carving and cutting
7.3.1 Fixed nut
Repair scene
The nuts on the CNC carving and cutting platform may fall off after long use or under incorrect operation, fix as
follows.
Maintenance method
Before operation, please wear protective gloves to prevent contact with toxic AB
glue, and wear protective equipment that can avoid inhalation of volatile toxic
gases.
1. Prepare the maintenance tools ready:
2. Remove the debris from the nut.
3. Extrude class A glue and class B glue in a 1:1 ratio.
Do not mistakenly use the lid of Class A glue on class B glue.
4. Mix Class A glue with Class B glue with a mixing bar and stir them well.