Series 200 Data Sheet

Designing a Ground System in
3 Simple Steps:
1) Go to the online Series 200 Configuration
Tool (configure.snapnrack.com)
2) I
dentify Site Parameters: Ground Pitch, Wind
Speed, and Snow Load
3)
Build array in the online Configuration Tool
and automatically generate a Bill of Materials.
4)
Place order with your distributor. Purchase
material for a single project or order in bulk
for additional savings
SnapNrack Solar Mounting Solutions
SERIES 200 UL
GROUND MOUNT SYSTEM
The SnapNrack line of solar mounting
solutions is designed to reduce total
installation costs. The system’s technical
innovations have been proven to drive
down costs and improve installation
quality on more than 350 MW of solar
installations.
Residential Ground Arrays Simplified
The SnapNrack Series 200 UL Ground Mount System is
an ecient and visually appealing PV module instal-
lation system for small to medium size ground mount
projects. Series 200 UL is designed to attach easily to a
standard galvanized pipe structure using structural pipe
fittings. Complete engineering tables are available for
most site conditions with stamped engineering letters
in all 50 states. Using a standard four-module assembly,
the system is ecient and flexible while optimizing
materials and minimizing system footprint. Industry
leading installation times are achieved with unique
snap-in fasteners.
•
Assembles easily using snap-in bonding pipe clamps
that feature channel nuts with integrated bonding pins
•
Integrates with Schedule 40 or 80 galvanized 1.5” pipe
•
Configures easily to desired tilt (0-45 degrees)
• Ultra-adjustable for precise alignment on any surface
• Rail channels provide excellent wire management
SnapNrack Series 200 May 2012
Patent Pending
PV Mounting System
2703