Ultra Rail Installation Manual

snapnrack.com
31
48"
Wire Management
Required Tools
ò
Reciprocating Saw or Chop Saw (Rail Cover)
ò
Socket Wrench (Wire Clamp)
ò
1/2” Socket (Wire Clamp)
Materials Included - Rail Cover
Install on standing metal seam roofs
that the seam clamp fits over.
(1) SnapNrack 48” Rail Cover
q
Install to protect any conductors that
are exposed to sunlight that are not
approved for use in UV light.
Application Note:
SnapNrack Wire Retention Clip
q
Install on standing metal seam roofs
that the seam clamp fits over.
Install as necessary to manage and
safely retain conductors within
SnapNrack rails.
Application Note:
Materials Included - Wire Clamp
(1) SnapNrack 4-Wire Clamp, Trunk Cable Clamp,
or Universal Wire Clamp
q
Install on standing metal seam roofs
that the seam clamp fits over.
Install as necessary to secure cables
and conductors running from rail to
rail, or transitioning out/in from a rail
channel
Application Note:
48” Rail Cover
Wire Retention Clip
Materials Included - Wire Retention Clip
Universal Wire Clamp Assembly