Ultra Rail Installation Manual

snapnrack.com
33
Wire Management
INSTALLATION INSTRUCTIONS
SnapNrack Wire Retention Clip
1) Place all electrical conductors in
the bottom of the rail channel.
2) Install the Wire Retention Clip by
snapping it into place on the rail.
SnapNrack 4-Wire, Trunk Cable, or Universal Wire Clamp
1) Snap Wire Clamp into top or side
rail channel.
2) With Wire Clamp loose, place
conductors or cables in slots.
3) Tighten Wire Clamp with
1/2” socket, ensure cables and
conductors are aligned in the
clamp slots.
Wire Clamps can be rotated and
oriented in any direction.
Install Note:
4) 4-Wire Clamp intended for PV
Wire conductors, Trunk Cable
Clamp intended for trunk cables,
Universal Wire Clamp intended for
both PV Wire conductors and AC
trunk cables.
Conductors of dierent types should
be placed under separate Universal
Wire Clamps.
Install Note: