Product Manual

Regular Maintenance

Figure 26. Parking Brake Adjustment

A. Brake Spring

B. First Measurement - .2-3/8” (6,03 cm)

C. Brake Spring Rod

D. Lock Nut

E. Second Measurement - 1/8” (0,32 cm)

F. Set Collar

G. Brake Pivot Link

Parking Brake Adjustment

1. Disengage the PTO, stop the engine, remove the ignition

key, and engage the parking brake.

2. Locate the brake spring (A, Figure 26) underneath the

rear of the machine.

3. With the parking brake engaged, measure the

compressed spring length of the brake spring. The

spring should be 2-3/8” (6,03 cm) when compressed.

If not, position the lock nut until the measurement

equals 2-3/8” (6,03 cm).

4. Measure the distance between the back of the brake

pivot link (G) and the front edge of the set collar (F).

The measurement should be 1/8” (0,32 cm). If not,

position the set collar until the measurement equals 1/8”

(0,32 cm).

If this does not correct the braking problem, see

your authorized dealer.

Not for

Reproduction