Product Manual

Regular Maintenance

Figure 28. 2 x 4 Locations

A. 36” Mower Deck

B. 48” Mower Deck

C. 2 x 4 Blocks

D. Arrow Indicating the Front of the Machine

Deck Leveling Adjustment

To Level the Mower Deck:

1. Park the machine on a flat, level surface. Disengage

the PTO, stop the engine and engage the parking brake.

Rear tires must be inflated to 15 psi (1,03 bar); front

tires to 25 psi (1,72 bar).

2. Pull the cutting height adjustment handle (A, Figure 27)

up and out of the handle lock position (B) and crank the

handle CLOCKWISE and adjust the deck to the 3” (7,6

cm) position.

3. Repeat process for other side of machine.

NOTE: Both sides of the deck must be adjusted to

the same height.

4. Place 2 x 4 blocks under the rear of the mower deck

with the 3-1/2” sides being vertical. See Figure 28.

5. Loosen the deck leveling hardware (D, Figure 27) on

both sides of the machine.

6. Make sure that the rear of the deck is resting on the 2 x

4’s. Tighten the deck leveling hardware on both sides of

the machine.

7. Remove all 2 x 4 blocks from under the mower deck.

Figure 27. Remove the Cutter Deck Guard

A. Cutter Height Adjustment Handle

B. Handle Lock Position

C. Cutting Height Indicator

D. Deck Leveling Hardware

Not for

Reproduction