N ot fo rR ep ro du c tio n 21" 82V Cordless Self-propelled Mower 1696860 (SXD21SPWM82) Owner’s Manual TOLL-FREE HELPLINE: 1-800-317-7833 www.snapper.com Read all safety rules and instructions carefully before operating this tool.
CONTENTS ep ro du c tio n Product Specifications ��������������������������������������������������������������������������������������������� 2 Safety Information ��������������������������������������������������������������������������������������������������� 3 Symbols ������������������������������������������������������������������������������������������������������������������ 6 Features and Controls ���������������������������������������������������������������������������������������������
SAFETY INFORMATION READ ALL INSTRUCTIONS WA R N I N G This mower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. WA R N I N G 1. GENERAL OPERATION • Don’t Use In Rain. • Keep Children Away – All visitors should be kept a safe distance from work area. tio • Avoid Dangerous Environment – Don’t use lawn mowers in damp or wet locations.
SAFETY INFORMATION • Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. • Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. • Read, understand, and follow all instructions on the machine and in the manual(s) before starting.
SAFETY INFORMATION 4. SERVICE • Keep all nuts, bolts, and screws tight in order to be sure that the equipment is in safe working condition. • Never remove or tamper with safety devices. Check their proper operation regularly. Never do anything to interfere with the intended function of a safety device or to reduce the protection provided by a safety device. • Keep machine free of grass, leaves, or other debris build up. Allow machine to cool before storing.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
FEATURES AND CONTROLS Read this operator's manual and safety rules before operating your mower. Compare the illustration in Figure 1 to your mower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
ASSEMBLY UNPACKING • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. • If any parts are damaged or missing, please call 1-800-317-7833 for assistance.
ASSEMBLY UNFOLDING AND ADJUSTING LOWER HANDLE (See Figure 2) WA R N I N G Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. • Do not damage the cables when folding or unfolding the handle. • If a cable is damaged, contact an Authorized Service Dealer. • Pull and rotate the handle knobs (1) 90° on both sides to loosen the lower handles (2) on both sides. du c (1) tio Note: Ensure both sides are set at the same position for proper assembly.
ASSEMBLY INSTALLING THE UPPER HANDLE (See Figure 3) tio n • Align the mounting holes on the upper handle (1) and the lower handle (2). Insert the bolts (3) and use the knobs (4) to tighten them. Repeat the operation on the other side. (4) fo rR (2) (4) ep ro (3) du c (1) N ot Fig.
ASSEMBLY INSTALLING THE GRASS CATCHER BAG (See Figure 4) • Lift the rear cover (1). • Lift the grass catcher by its handle (2) and place under the rear cover so that the hooks (3) on the grass catcher (4) are seated on the door rod (5). • Release the rear cover. When installed correctly, the hooks on the grass catcher will extend through the openings on the rear cover. n NOTE: When using the grass catcher, do not install either the side discharge deflector or the mulching plug.
ASSEMBLY INSTALLING/REMOVING THE MULCHING PLUG (See Figure 5) • To remove the mulching plug, lift the rear cover (1). • Grasp the handle (2) of the mulching plug. Lift and pull the mulching plug out using the handle. • The mulching plug (3) is inserted at an angle, so it requires some force to remove it. • The mulching plug must be removed in order to install the grass catcher bag. • The mulching plug must be re-installed when the grass catcher bag is removed. fo rR ep ro du c tio n (1) (3) Fig.
ASSEMBLY INSTALLING SIDE DISCHARGE CHUTE (See Figure 6) • Lift the side discharge cover (1). • Align the grooves (2) on the discharge chute (3) with the pins (4) on the underside of the discharge cover (1). • Lower the discharge chute until the hooks on the mower deck are secured in the openings in the discharge chute. fo rR ep ro du c (2) tio (4) n • Release the side discharge cover. N ot (1) 13 (3) Fig.
ASSEMBLY TO INSTALL BATTERY PACK (See Figure 7) • Lift and hold up the battery door (1). • Align the battery (2) with the mower’s battery port. • Make sure the battery release button (3) snaps in place and that battery is fully seated and secure in the mower before beginning operation. • If the machine is not going to be used immediately, remove the battery. n • Close the door. tio (1) fo rR (2) ep ro du c (3) ot Fig.
OPERATION STARTING/STOPPING THE MOWER (See Figure 8) To start the motor: • Open the battery door. Insert the battery. • Press and hold the safety lock-out button (1). • Pull the bail lever (2) upward to the handle to start the mower and release the button. To stop the motor: • Release the bail lever. C A U T I O N du c Do not attempt to override the operation of the safety lock-out button or bail lever. tio n Soft-Start This LI-ION mower is equipped with a “soft-start” feature.
OPERATION CUTTING HEIGHT ADJUSTMENT (See Figure 9) When shipped, the wheels on the mower are set to a low-cutting position. Before using the mower for the first time, raise the cutting position to the height best suited for your lawn. The average lawn should be between 1 1/2" to 2" (3.8 to 5 cm) during cool months and between 2" and 3 1/2" (5 cm to 8.3 cm) during hot months.
OPERATION SLOPE GAUGE (See Figure 10) • For your safety, use the slope gauge that is included as part of this manual to measure slopes before operating this unit on a sloped or hilly area. • Always be sure of your footing. If you feel like you are losing your balance, release the blade/ motor control handle immediately. The blade will stop rotating within 3 seconds. • Do not mow near drop-offs, ditches, or embankments, because you could lose your footing or balance.
OPERATION MOWING TIPS NOTE: A sharp blade will greatly enhance the performance of the mower, especially when cutting high grass. Be sure to check the blade and to sharpen it at least once per year, as described in the Maintenance section. • Verify that the lawn is free of stones, sticks, wires, and other objects that could damage the blades or the motor. These objects could be accidentally thrown by the mower in any direction, and could cause serious personal injury to the operator and to others.
BATTERY & CHARGER CHARGING PROCEDURE NOTE: The battery is not shipped fully charged. It is recommended to fully charge before first use to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be charged at any time. Low voltage charging: If the battery has been stored with little to no charge for a long period of time, the charger will go into recovery mode, which will take 20 hrs to fully charge the battery. This will enhance the life of the battery.
BATTERY & CHARGER CHARGER MOUNTING fo rR ep ro du c tio n 1. This charger can be installed hanging on a wall using two #8 screws (not included). 2. Locate the placement for the charger to be wall mounted. 3. If fastening to wood studs use 2 wood screws (not included). 4. Drill two holes on center 4.5 in. apart ensuring that they are vertically aligned. 5. If fastening to drywall use wall anchors (not included) and screws to secure the charger to the wall. 6.
MAINTENANCE REPLACING THE CUTTING BLADE (See Figures 12-13) WA R N I N G Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with rags or other materials when performing any maintenance on the blades. ALWAYS remove the battery when servicing or transporting the mower. du c tio n • REMOVE BATTERY. • While wearing leather padded gloves, wedge a block of wood between the blade and the mower deck in order to prevent the blade from turning when the bolt (1) is being removed.
MAINTENANCE CLEANING THE MOWER WA R N I N G In order to reduce the risk of electric shock, do not expose the mower to water. The underside of the mower deck should be cleaned after each use, because grass clippings, leaves, dirt, and other debris will accumulate, which will cause rust and corrosion. Remove any build-up of grass and leaves on or around the motor cover (do not use water).Occasionally wipe the mower clean with a dry cloth.
MAINTENANCE VERTICAL STORAGE FUNCTION (See Figure 14 ) • Remove the battery from the mower. Remove the grass catcher bag. • Rotate the handle knobs to the unlocked position. • Lower the handle assembly and rotate the handle knobs to the locked position. • Lift the mower by the front end to the vertical position. WA R N I N G Always remove the battery from the mower before placing the unit in the vertical storage position.
ENVIRONMENTALLY SAFE BATTERY DISPOSAL The following toxic and corrosive materials are in the batteries used in this tool battery pack: Lithium-Ion, a toxic material. WA R N I N G tio n Toxic materials must be disposed of in a specified manner in order to prevent contamination of the environment. Before disposing of damaged or worn out Lithium-Ion battery packs, contact your local waste disposal agency for information and specific instructions.
TROUBLESHOOTING PROBLEM The mower does not start. POSSIBLE CAUSE SOLUTION The battery is not charged. Charge the battery. The switch is defective. Replace the switch (Contact an authorized service center). Grass jammed between the deck and blade. Remove battery; check under deck for jams. n The battery is not fully inserted Check the connection between the battery and the mower. Make in the mower. sure the battery clicks into place. The cutting height is not set properly.
LIMITED WARRANTY Briggs & Stratton warrants that, during the warranty period specified below, it will repair or replace, free of charge, any part that is defective in material or workmanship or both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty is effective for and is subject to the time periods and conditions stated below. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at www.
LIMITED WARRANTY ABOUT YOUR WARRANTY Warranty service is available only through Snapper Authorized Service Dealers. This warranty covers only defects in materials or workmanship. It does not cover damage caused by improper use or abuse, improper maintenance or repair, normal wear and tear, or stale or unapproved fuel. n Improper Use and Abuse - The proper, intended use of this product is described in the Operator’s Manual.
n tio du c ep ro fo rR ot N Briggs & Stratton Corporation P.O.
N ot fo rR ep ro du c tio n 21 PO. Tondeuse Automotrice Sans Fil de 82V 1696860 (SXD21SPWM82) Guide d’utilisation LIGNE D’ASSISTANCE SANS FRAIS: 1-800-317-7833 www.snapper.com Avant d’utiliser le produit, veuillez lire et suivre toutes les consignes de sécurité et les instructions d’utilisation.
MATIÈRES FICHE TECHNIQUE ep ro du c tio n Fiche technique ....................................................................................................... 2 Règles de sécurité ................................................................................................... 3 Symboles ................................................................................................................ 6 Caractéristiques et Contrôles ...................................................................
RÈGLES DE SÉCURITÉ VEUILLEZ LIRE TOUTES LES INSTRUCTIONS ATTENTIVEMENT AV E R T I S S E M E N T La tondeuse peut couper des parties du corps et projeter des objets. Le non-respect des consignes de sécurité suivantes pourrait causer des blessures graves et même la mort. AV E R T I S S E M E N T n Pour l’utilisation de matériel de jardinage électriques, des précautions de base devraient toujours être suivies pour réduire le risque d’incendie, d’électrocution et de blessures, notamment les suivantes: 1.
RÈGLES DE SÉCURITÉ • Utilisez uniquement des batteries de rechange approuvées par briggs & stratton, car les autres batteries peuvent causer des blessures ou endommager la tondeuse. À utiliser uniquement avec les batteries Briggs & Stratton BSB2AH82 (2 amp-heure), BSB4AH82 (4 amp-heure) et BSB5AH82 (5 amp-heure). À utiliser uniquement avec le chargeur BSRC82 et BSSC82 de Briggs & Stratton. • Ne jetez pas la pile dans un feu. Ceci pourrait faire exploser la cellule.
RÈGLES DE SÉCURITÉ 3. ENFANTS Des accidents tragiques peuvent survenir si l’utilisateur n’est pas conscient de la présence d’enfants à proximité. Les enfants sont souvent attirés par l’appareil et par la tonte en soi. Ne présumez jamais que les enfants demeureront là où vous les avez vus la dernière fois. • Tenez les enfants à distance de la zone de coupe, et sous la surveillance attentive d’un adulte. • Faites preuve de vigilance.
SYMBOLES Certains des symboles suivants peuvent figurer sur cet article. Familiarisez-vous avec eux et a prenez leur signification. En comprenant ces symboles, vous serez en mesure de faire fonctionner cet article de façon adéquate et sécuritaire.
CARACTÉRISTIQUES ET CONTRÔLES Lisez ce manuel d’instructions et toutes les consignes de sécurité avant d’utiliser votre tondeuse à gazon. Comparez l’illustration ci-dessus (fig. 1) à votre tondeuse afin de vous familiariser avec l’emplacement des commandes et réglages. Conservez ce manuel pour consultation future.
ASSEMBLAGE DÉBALLAGE • Retirez prudemment le produit et les accessoires de la boîte. Assurez-vous que tous les articles énumérés dans la liste de colisage sont inclus. • Assurez-vous que le produit n’a pas subi des dommages ou de bris pendant le transport. • Ne jetez pas l’emballage avant d’avoir inspecté le produit et avant d’avoir vérifié s’il fonctionne correctement. • Si des pièces sont manquantes ou endommagées, veuillez appeler au 1-800-317-7833 pour obtenir de l’aide.
ASSEMBLAGE DEPLIAGE ET REGLAGE DE LA PO IGNEE INFERIEURE (Voir figure 2) AV E R T I S S E M E N T Pliage ou dépliage incorrect de la poignée peut endommager les câbles, occasionnant une condition d’exploitation dangereuse. • Ne pas endommagez les câbles lors pliant ou dépliant la poignée. • Si le câble est endommagé, veuillez contacter un centre de réparations agréé. n • Tirez et tournez les boutons de poignée (1) 90° sur les deux côtés à desserrer les poignées inférieures (2) sur les deux côtés.
ASSEMBLAGE INSTALLATION DE LA PO IGNEE SUP ERIEURE (Voir figure 3) tio n • Alignez les trous de montage sur la poignée supérieure (1) et la poignée inférieure (2). Insérez les boulons mécaniques (3) et employez les boutons (4) afin de les serrer. Répétez l’opération sur l’autre côté. (4) fo rR (2) (4) ep ro (3) du c (1) N ot Fig.
ASSEMBLAGE PO SE DU SAC ARRIÈRE (Voir figure 4) • Soulevez le couvercle de la bouche d’évacuation (1). • Levez le collecteur d’herbe par sa poignée (2) et mettez-le au-dessous du couvercle de la bouche d’évacuation de façon à ce que les crochets (3) sur le collecteur d’herbe (4) s’appuient sur la barre du couvercle (5). • Relâchez le couvercle de la bouche d’évacuation.
ASSEMBLAGE PO SE DE L’ACCESSOIRE DE DÉCHIQUETAGE (Voir figure 5) • To remove the mulching plug, lift the rear cover (1). • Pour enlever l’accessoire de déchiquetage, soulevez le couvercle de la bouche d’évacuation (2). • L’accessoire de déchiquetage (3) est inséré à angle; il faut donc exercer une certaine force pour l’enlever. • Vous devez enlever l’accessoire de déchiquetage pour pouvoir utiliser le sac arrière. • Réinstallez le sac arrière si vous enlevez l’accessoire de déchiquetage.
ASSEMBLAGE INSTALLATION DU DÉFLECTEUR D’ÉJECTION LATÉRALE (Voir figure 6) • Levez le couvercle d’éjection latérale (1). • Alignez les rainures (2) sur le déflecteur (3) avec les goupilles (4) sur le côté intérieur du couvercle (1). • Abaissez le déflecteur jusqu’à ce que les crochets sur le châssis de la tondeuse soient bien insérés dans les ouvertures du déflecteur. tio n • Relâchez le déflecteur et le couvercle. (4) fo rR ep ro du c (2) N ot (1) 13 (3) Fig.
ASSEMBLAGE POUR INSTALLER LA BATTERIE (Voir figure 7) • Soulevez le couvercle du compartiment de batterie (1) et gardez-le ouvert. • Alignez la batterie (2) dans le support prévu à cet effet à l’intérieur de la tondeuse. • Veillez à ce que le bouton d’éjection de la batterie (3) soit bien en place et que la batterie soit insérée correctement avant de mettre la tondeuse en marche. • Si l’appareil n’est pas utilisé dans l’immédiat, retirez la batterie. n • Refermez le couvercle.
UTILISATION DÉMARRAGE/ARRÊT DE LA TONDEUSED (Voir figure 8) Pour faire démarrer le moteur : • Soulevez le couvercle du compartiment de la batterie. Installez la batterie. • Appuyez et gardez enfoncé le bouton de verrouillage (1). • Tirez le levier d’alimentation (2) vers le haut (vers la poignée principale) pour faire démarrer le moteur, puis relâchez le bouton. Pour arrêter le moteur : • Relâchez le levier d’alimentation.
UTILISATION RÉGLAGE DE LA HAUTEUR DE COUPE (Voir figure 9) Pour l’expédition, les roues de la tondeuse sont réglées à la position de coupe au ras du sol. Avant d’utiliser la tondeuse pour la première fois, réglez la position de coupe à la hauteur la mieux adaptée à votre pelouse. Une pelouse moyenne devrait avoir de 1 1/2 à 2 po (3,8 à 5 cm) pendant les mois de temps froid et entre 2 et 3 1/2 po (5 à 8,3 cm) pendant les mois de temps chaud.
UTILISATION INDICATEUR DE PENTE (Voir figure 10) • Par mesure de sécurité, servez-vous de l’indicateur de penteinclus dans ce guide afin de mesurer la pente avant de tondre une zone en pente ou vallonnée. • Maintenez toujours votre équilibre. Si vous avez l'impression de perdre l’équilibre, relâchez immédiatement le levier de commande du moteur/de la lame; la lame cessera de tourner en trois secondes.
UTILISATION CONSEILS SUR LA TONTE DU GAZON NOTE : la tondeuse offrira un meilleur rendement si la lame est bien affûtée, particulièrement lorsque le gazon est long. Examinez la lame et affûtez-la au moins une fois l’an de la façon décrite dans la section Entretien. • Assurez-vous qu’il n’y a pas de pierres, de branches, de câbles ou d’autres objets sur le gazon qui pourraient endommager la lame ou le moteur.
BATTERIE ET DU CHARGEUR PROCÉDURE DE CHARGE NOTE : La batterie n’est pas livrée totalement chargée. Il est recommandé de la recharger totalement avant utilisation pour lui assurer une autonomie maximale. Cette batterie lithium-ion est exempte d’effet mémoire et peut être rechargée à tout moment.
BATTERIE ET DU CHARGEUR MONTAGE DU CHARGEUR 1. Ce chargeur peut être installé au mur au moyen de #8 vis (non incluses). 2. Repérez l’endroit où vous désirez effectuer le montage mural du chargeur. 3. Si l’endroit choisi comporte des montants de bois, utilisez 2 vis à bois (non incluses). 4. Percez deux trous dans le centre, avec une distance de 11,43 cm entre chaque trou et assurezvous qu’ils sont alignés verticalement. 5.
ENTRETIEN REMPLACEMENT DE LA LAME (Voir figure 12-13) AV E R T I S S E M E N T Avant de faire l’entretien des lames, protégez-vous toujours les mains en portant des gants épais ou en enveloppant les lames avec des chiffons ou autres matériaux épais. Enlevez TOUJOURS la batterie en entretenant ou en transportant la tondeuse. du c tio n • ENLEVEZ LA BATTERIE. • Enfilez des gants de cuir rembourrés.
ENTRETIEN NETTOYAGE DE LA TONDEUSE AV E R T I S S E M E N T Pour réduire le risque de choc électrique, n’exposez pas la tondeuse à l’eau. Le dessous du plateau de tonte devrait être nettoyé après chaque utilisation, car de l’herbe, des feuilles, de la terre et d’autres débris s’y accumulent, causant ainsi de la rouille et de la corrosion. n Enlevez toute accumulation d'herbe et de feuilles sur le dessus et autour du couvercle du moteur (n’utilisez pas d’eau à cette fin).
ENTRETIEN RANGEMENT VERTICAL (Voir figure 14 ) • Retirez la batterie de la tondeuse. Retirez le bac à herbe. • Tournez les poignées vers la position Déverrouillée • Abaissez la poignée inférieure et tournez les commandes de la poignée vers la position de verrouillage. • Soulevez la tondeuse par son extrémité avant afin de la placer en position verticale. AV E R T I S S E M E N T Retirez toujours la batterie dans la tondeuse avant de ranger celle-ci en position verticale.
MISE AU REBUT DE LA BATTERIE SANS DANGERPOUR L’ENVIRONNEMENT La batterie de la tondeuse comprend du lithium-ion, une substance toxique. AV E R T I S S E M E N T tio n Toutes les substances toxiques doivent être éliminées d’une manière permettant d’éviter la contamination de l’environnement.
DÉPANNAGE La batterie est à plat. Chargez la batterie. Le levier de commande du moteur/de la lame est défectueux. Remplacez l’interrupteur (contactez un centre de service autorisé). L'herbe a enfoncé à côté de la l ame. Enlever la pile. Vérifier sous le pont pour garantir de l'herbe n'est pas enfoncée à côté de la lame. La batterie n’est pas branchée au moteur. Vérifiez la connexion entre la batterie et le moteur. Assurezvous que la pile est enclenchée correctement.
GARANTIE LIMITÉE Briggs & Stratton garantit la réparation ou le remplacement gratuit, pendant la période de garantie spécifiée ci-dessous, de toute pièce présentant des vices de matériaux ou de fabrication. Les frais de transport du produit à réparer ou remplacer seront, dans le cadre de cette garantie, réglés par l'acheteur. Cette garantie court sur les périodes énoncées ci-dessous et est assujettie aux conditions énoncées ci-dessous.
GARANTIE LIMITÉE AU SUJET DE LA GARANTIE Un service en vertu de la garantie n'est disponible que par l'intermédiaire des distributeurs autorisés Snapper. Parfois, les demandes de réparations dans le cadre de la garantie peuvent ne pas être pertinentes. La présente garantie couvre uniquement les vices de matériaux ou de fabrication. Elle ne couvre pas les dommages causés par une utilisation inappropriée ou abusive, un entretien ou une réparation inapproprié, ou l'usure normale.
n tio du c ep ro fo rR ot N Briggs & Stratton Corporation P.O.
N ot fo rR ep ro du c tio n Podadora De Césped De 21 Pulgadas Inalámbrica \ Autoimpulsada de 82V 1696860 (SXD21SPWM82) Manual del Propietario LÍNEA DE AYUDA GRATUITA: 1-800-317-7833 www.snapper.com Antes de hacer funcionar esta herramienta, lea cuidadosamente todas las reglas de seguridad y las instrucciones.
ÍNDICE ep ro du c tio n Especificaciones del Producto ��������������������������������������������������������������������������������� 2 Información sobre Seguridad ����������������������������������������������������������������������������������� 3 Símbolos ����������������������������������������������������������������������������������������������������������������� 6 Funciones y Controles ��������������������������������������������������������������������������������������������� 7 Ensamblado �
INFORMACIÓN DE SEGURIDAD GUARDAR ESTAS INSTRUCCIONES A D V E R T E N C I A Esta podadora puede amputar partes del cuerpo y arrojar objetos. El incumplimiento de las siguientes normas de seguridad puede resultar en lesiones graves o la muerte. A D V E R T E N C I A n Cuando se utiliza maquina de cortadoras de césped, las precauciones básicas de seguridad siempre debe ser seguido para reducir el riesgo de incendio, descarga eléctrica, y lesiones personales, entre ellas las siguientes: 1.
INFORMACIÓN DE SEGURIDAD • Utilice baterías de repuesto aprobadas únicamente. Otras bateríaspueden ocasionar daños a la podadora. Solo deben utilizarse baterías BSB2AH82 (2 amp/hora) o BSB4AH82 (4 amp/hora) o BSB5AH82 (5 amp/hora) de Briggs & Stratton. Solo debe utilizarse el cargador BSRC82 o BSSC82de Briggs & Stratton. • No tire la batería al fuego. La celda podría explotar. Compruebe la normativa local si existen instrucciones de desecho especiales. • No abra las baterías ni las corte.
INFORMACIÓN DE SEGURIDAD 3. NIÑOS Pueden ocurrir accidentes trágicos si el operador no está atento a la presencia de niños. Normalmente, los niños se sienten atraídos por la máquina y por el corte. Nunca suponga que los niños van a permanecer donde les vio por última vez. • Mantenga a los niños fuera del área de trabajo y bajo estricta vigilancia de un adulto responsable. • Esté alerta y apague la podadora si un niño o cualquier otra persona ingresan al área de trabajo.
SYMBOLS Algunos de los siguientes símbolos pueden ser usados en este producto. Obsérvelos y aprenda su significado. La interpretación correcta de estos símbolos permite una operación mejor y más segura.
FUNCIONES Y CONTROLES Lea el manual del operador y las normas de seguridad antes de manejar la podadora. Compare la ilustración en Fig. 1 con la podadora para familiarizarse con la ubicación de los diferentes controles y ajustes. Guarde este manual para referencia futura.
ENSAMBLADO DESEMPAQUETADO • Extraiga cuidadosamente de la caja la herramienta y los accesorios. Asegúrese de que estén presentes todos los artículos enumerados en la lista de empaquetado. • Inspeccione cuidadosamente la herramienta para asegurarse de que no haya sufrido ninguna rotura o daño durante el transporte. • No deseche el material de empaquetado hasta que haya inspeccionado cuidadosamente la herramienta y la haya utilizado satisfactoriamente.
ENSAMBLADO DESPLEGAR Y AJUSTAR EL MANGO INFERIOR (Consulte la figura 2) A D V E R T E N C I A Plegar y desplegar el mango incorrectamente puede dañar los cables y dar lugar a unas condiciones de funcionamiento inseguras. • No dañe los cables al plegar o desplegar el mando. • Si el cable está dañado póngase en contacto con el establecimiento de servicio autorizado. n • Tire y gire 90º las perillas de los mangos (1) que están a los dos lados para aflojar los mangos inferiores (2) de los dos lados.
ENSAMBLADO INSTALACIÓN DEL MANGO SUPERIOR (Consulte la figura 3) tio n • Alinee los agujeros para montar de la manija superior (1) y la manija inferior (2). Introduzca el perno (3) de cabeza de hongo y utilice las perillas (4) para apretarlos. Repita la operación por el otro lado. (4) fo rR (2) (4) ep ro (3) du c (1) N ot Fig.
ENSAMBLADO COLOCACIÓN DEL COLECTOR DE CÉSPED (Consulte la figura 4) • Levante la puerta de descarga posterior (1). • Levante el receptor de hierba por su mango (2) y colóquelo debajo de la puerta de descarga posterior de modo que los ganchos (3) del receptor de hierba (4) queden asentados en la barra de la puerta (5). • Suelte la puerta de descarga posterior. Cuando estén correctamente instalados, los ganchos del receptor de hierba saldrán por las aberturas de la puerta de descarga posterior.
ENSAMBLADO INSTALACIÓN O RETIRO DE LA CLAVIJA PARA COMPUESTO ORGÁNICO (Consulte la figura 5) • Para quitar el tapón de la función para cubrimiento con hojarasca , levante la puerta de descarga posterior (1). • Tome la manija (2) del tapón de la función para cubrimiento con hojarasca y sáquelo mediante la manija. • El tapón de la función para cubrimiento con hojarasca (3) se inserta angulado, por lo que es necesario ejercer un poco de fuerza para quitarlo.
ENSAMBLADO INSTALACIÓN DEL DEFLECTOR DE DESCARGA LATERAL (Consulte la figura 6) • Levante la puerta de descarga lateral (1). • Alinee las ranuras (2) del deflector (3) con los pasadores (4) de la Puerta de descarga lateral (1). • Baje el deflector hasta que los ganchos del piso de la podadora estén asegurados en las aberturas del deflector. fo rR ep ro du c (2) tio (4) n • Suelte el deflector y la puerta. N ot (1) 13 (3) Fig.
ENSAMBLADO PARA INSTALAR LA BATERÍA (Consulte la figura 7) • Levante y sostenga la tapa de la batería (1). • Alinee la batería (2) con el puerto de la batería de la podadora. • Asegúrese de que el botón de liberación de la batería (3) trabe en su lugar y que la batería esté completamente asentada y asegurada en la podadora antes de empezar la operación. • Si la máquina no se va a utilizar inmediatamente, retire la batería. n • Cierre la tapa. tio (1) fo rR (2) ep ro du c (3) ot Fig.
FUNCIONAMIENTO ENCENDIDO / APAGADO DE LA PODADORA (Consulte la figura 8) Para arrancar la podadora: • Levante la tapa de la batería. Instale la batería. • Presione y mantenga presionado el botón de bloqueo para seguridad (1). • Hale la palanca de control (2) hacia arriba de la manija para encender la podadora y suelte el botón. Para detener la podadora: • Libere la palanca de control. tio n Arranque suave Este cortacésped de LI-ION está equipado con una función de "arranque suave".
FUNCIONAMIENTO AJUSTE DE LA ALTURA DE CORTE (Consulte la figura 9) Al enviarse el aparato, las ruedas en el cortacésped se ajustan a una posición de corte bajo. Antes de usar el cortacésped por primera vez, ajuste la posición del corte a la altura más adecuada para su cortacésped. El césped promedio debería medir entre 38 mm y 50 mm durante los meses fríos y entre 50 mm y 83 mm durante los meses cálidos.
FUNCIONAMIENTO MANEJO EN PENDIENTES (Consulte la figura 10) • Para su seguridad, antes de hacer funcionar esta podadora en un área inclinada o con lomas, utilice el registrador de pendientes que ha sido incluido como parte de este manual para medir pendientes. • Siempre asegúrese de su postura. Un resbalón y caída puede provocar lesiones serias. Si siente que está perdiendo el equilibrio, suelte el mango de control del motor/cuchilla inmediatamente. La cuchilla para de girar en 3 segundos.
FUNCIONAMIENTO CONSEJOS DE PODA NOTA: el rendimiento de la podadora será mucho mayor con una cuchilla filosa, especialmente si de corta césped alto. Asegúrese de revisar la cuchilla y afilarla al menos una vez al año, según se describe en la sección Mantenimiento. • Verifique que no haya piedras, palos, cables ni otros objetos en el césped que puedan dañar las cuchillas o el motor.
BATERÍA Y EL CARGADOR PROCEDIMIENTO DE CARGA NOTA: La batería no se envía completamente cargada. Se recomienda cargarla completamente antes de usarla por primera vez para garantizar que se pueda obtener el máximo tiempo de funcionamiento. Esta batería de ión de litio no desarrolla memoria y se le puede cargar en cualquier momento.
BATERÍA Y EL CARGADOR MONTAJE DEL CARGADOR fo rR ep ro du c tio n 1. Este cargador se puede instalar en una pared atornillándolo con dos #8 tornillos (no incluidos). 2. Localice el lugar en el que quiere colgar el cargador. 3. Si la pared es de madera, utilice dos tornillos especiales para madera (no incluidos). 4. Taladre dos hoyos en el centro, a una distancia de 11,43 cm, y asegúrese de que estén alineados verticalmente. 5.
MANTENIMIENTO CAMBIO DE LA CUCHILLAE (Consulte la figura 12-13) A D V E R T E N C I A Para reducir el riesgo de descarga eléctrica, no exponga la podadora al agua. Se debe limpiar el lado inferior de la plataforma de la podadora después de cada uso, ya que se acumulan recortes de césped, hojas, suciedad y otros desechos, y producen óxido y corrosión. du c tio n • Retire la batería.
MANTENIMIENTO LIMPIEZA DE LA PODADORA A D V E R T E N C I A Para reducir el riesgo de descarga eléctrica, no exponga la podadora al agua. Se debe limpiar el lado inferior de la plataforma de la podadora después de cada uso, ya que se acumulan recortes de césped, hojas, suciedad y otros desechos, y producen óxido y corrosión. n Retire toda acumulación de césped y hojas en y alrededor de la cubierta del motor (no use agua). Limpie la podadora con un paño seco de vez en cuando.
MANTENIMIENTO FUNCIÓN DE ALMACENAMIENTO VERTICAL (Consulte la figura 14 ) • Retire la batería del cortacésped. Retire la bolsa de colector de césped. • Gire las perillas del mango a la posición de desbloqueo. • Baje el conjunto del mango y gire las manillas del mango a la posición de bloqueo. • Levante el cortacésped por la parte delantera a la posición vertical. A D V E R T E N C I A Siempre retire la batería el cortacésped antes de colocar la unidad en la posición de almacenamiento vertical.
ELIMINACIÓN DE LA BATERÍA QUE NO DAÑA EL MEDIO AMBIENTE Las baterías que se utilizan en el paquete de baterías de esta podadora contienen los siguientes materiales tóxicos y corrosivos: ION DE LITIO. A D V E R T E N C I A du c tio n Se debe desechar los materiales tóxicos de la forma especificada para evitar contaminar el medio ambiente.
SOLUCIÓN DE PROBLEMAS PROBLEMA La podadora no arranca. CAUSA POSIBLE SOLUCIÓN La batería no tiene carga. Cargue la batería. El interruptor de control está dañado. Sustituya el interruptor (póngase en contacto con un centro de servicio autorizado). Pasto pegado al lado de la hoja. Quite beteria.Verifique bajo plataforma para asegurar que césped no sea atascado luego a la hoja. Póngase en contacto con un centro de servicio autorizado o sustituya la batería. El césped es escabroso o desparejo.
GARANTÍA LIMITADA Briggs & Stratton se compromete a que, durante el período de garantía especificado a continuación, reparará o sustituirá, de manera gratuita, cualquier pieza con defectos de material o fabricación, o de ambos. El comprador deberá correr con los gastos de transporte del producto que envíe para reparación o reemplazo al amparo de esta garantía. Esta garantía tiene vigencia y está sujeta a las condiciones que se establecen más adelante.
GARANTÍA LIMITADA ACERCA DE LA GARANTÍA El servicio de garantía solo está disponible a través de los distribuidores de servicio autorizados de Snapper. La mayor parte de las reparaciones bajo garantía se atienden de manera rutinaria, pero algunas veces las solicitudes de reparaciones bajo garantía podrían no ser apropiadas Esta garantía SÓLO cubre defectos en materiales y mano de obra.
n tio du c ep ro fo rR ot N Briggs & Stratton Corporation P.O.