Use and Care Manual

Not for

Reproduction

Fig. 7

ASSEMBLY

TO INSTALL BATTERY PACK (See Figure 7)

• Lift and hold up the battery door (1).

• Align the battery (2) with the mower’s battery port.

• Make sure the battery release button (3) snaps in place and that battery is

fully seated and secure in the mower before beginning operation.

• Insert the safety key (4). If the machine is not going to be used immediately,

do not insert the safety key.

• Close the door.

TO REMOVE BATTERY PACK (See Figure 7)

• Release the bail lever to stop the mower.

• Open the battery door. Remove the safety key.

• Press the battery release button (3) on the mower. This will cause the

battery to raise out of the tool slightly.

• Remove battery from the mower.

(3)

(1)

(2)

(4)