Triple Bag Catcher with Turbo Operator's Manual

D
A
B
Install Upright Support
1. Set the upright support (A, Figure 7) onto pins of
hitch plate (B)
2. Secure with rod (C) and hair pin (D).
C
Figure 7. Install Upright Support
A. Upright Support C. Rod
B. Hitch Plate D. Hair Pin
Turbo Installation / Triple Catcher Bag Installation
Install Hitch Plate
1. Place the hitch plate (A, Figure 6) onto the bumper
(B) and loosely tighten with U-bolts (C) and locknuts
(D).
2. After the hitch plate is properly centered on the
bumper, tighten the locknuts securely.
D
C
A
C
D
B
Figure 6. Install Hitch Plate
A. Hitch Plate C. U-Bolts
B. Bumper, Tube D 3/8-16 Locknuts
8
Install Bag and Cover Support
1. Install the bag and cover support (A, Figure 8) to
upright support (B).
2. Secure with capscrews (C) and locknuts (D).
B
C
A
D
Figure 8. Install Bag and Cover Support
A. Bag and Cover Support C. 3/8-16 x 1 Capscrews
B. Upright Support D. 3/8-16 Locknuts