Triple Bag Catcher with Turbo Operator's Manual

Triple Catcher Bag Installation / Turbo Removal
Figure 12. Install Carrier and Front Weight(s)
A. Carrier, Weight D. Weight(s)
B. 1/2-13 x 1-1/4, E. Rod
Capscrews F. Safety Clips
C. 1/2-13 Locknuts
A
B
F
D
E
Install Carrier and Front Weight(s)
1. Install carrier (A, Figure 12) as shown and secure
with capscrews (B) and locknuts (C).
2. Secure weight(s) (D) using rod (E) and safety
clips (F).
11
F
B
C
Remove Turbo Blower
WARNING
The deflector must be properly installed in the
down position and retained. Do not operate the
unit without a deflector.
1. Remove the plastic knob (D, Figure 4) that secures
the turbo blower to the hook plate.
2. Push the lever (A, Figure 5) counterclockwise to
release tension on the belt, and remove the belt from
the arbor pulley (B).
3. Remove spring clips (C, Figure 4) from tapered spac-
ers (C, Figure 3) at the front and rear of hinge.
4. Remove the turbo blower assembly (A. Figure 4)
from the mower deck.
5. Return the deflector to the down position.
NOTE: The front baffles (Figure 1) do not need to be
removed.