Triple Bag Catcher with Turbo Operator's Manual

Turbo Installation
Install Deflector and Hinge
1. Install the new deflector and hinge assembly (A,
Figure 3) onto 54-inch mower deck.
2. Secure front of hinge bracket using a new carriage
bolt (B), cylinder spacer (C), lockwasher (D), and nut
(E).
3. Secure back of hinge bracket using carriage bolt (F),
tapered spacer (G), cylinder spacer (C), lockwasher
(D), and nut (E).
A
G
C
E
D
E
D
C
B
F
Install Turbo Blower
1. Pivot the deflector (A, Figure 4) up and out of the
way.
2. Install the turbo blower assembly (B) over the
tapered spacers. Turbo should hook the bottom
hook plate.
3. Install one spring clip (C) on tapered spacers at the
front and rear of hinge to hold in place.
4. Secure turbo blower on hook plate (A, Figure 2)
using plastic knob (D, Figure 4).
5. Push the lever (A, Figure 5) counterclockwise to
release tension on the belt, and install the belt on the
arbor pulley (B).
B
Figure 3. Install Deflector and Hinge
A. Deflector and Hinge Assembly
B. 1/4-20 x 1-1/4 Carriage Bolt
C. 13/16 x 1 Cylinder Spacer
D. Lockwashers
E. 1/4-20 Nuts
F. 1/4-20 x 2-1/4 Carriage Bolt
G. Tapered Spacers
A
D
Figure 4. Install Turbo Blower Assembly
A. Deflector C. Spring Clips
B. Turbo Blower Assembly D. Plastic Knob
7
Figure 5. Belt Routing
A. Lever B. Arbor Pulley
FRONT
A
B
C
C