Manual

Preparation (Continued)
,w
O=
O_
=,.,.
Attachingthe SideMountedDischargeDeflector
WARNING:Toprevent the enginefrom
starting,disconnectthe wire from the
sparkplug.
For shipping purposes, the side deflector was not installed.
Locate the side deflector and install as follows.
1. Raisethe mulcher cover (A, Figure8).
2. Slide the two tabs (B) on the side deflector (C) under
the pivot pin.
3. Lower the side deflector. Make sure the locking tab (A,
Figure 9) goes through the slot in the side deflector.
4. Lower the mulcher cover (A, Figure 10).
5. Attach the wire to the spark plug.
Figure 9: Side discharge deflector locking tabs
Figure 8: Installing the side discharge deflector
Figure 10.Releasingthe mulcher cover
8 www.snapper.com