Manual

Preparation (Continued)
Mounting the Grass Bag
1. To mount the grass bag on the mower, raise the rear
door (A, Figure7). Holding the grass bag by the handle
(B), mount the hooks (C) on either end of the grass bag
frame assembly onto the reardoor pivot rod (D). Lower
the grass bag againstthe rear of the mower. Lower the
rear door.
Important. Makesure both grass bag hooks are mounted on
the pivot rod.
WARNING:Checkthe conditionof the grass
bagfor wear or deterioration.If worn or
damaged,replace the parts onlywith
approvedfactoryreplacementparts.
,,=z.
m.
,-I
Emptying the Grass Bag
WARNING:Beforeyou removethe grassbag,
stopthe engine. Beforeyou removeany grass
from the mower housing,disconnectthewire
from the sparkplug.
1. Raisethe rear door to a vertical position.
2. Hold the handle of the grass bag and lift the frame
assembly. Continueto lift the frame assembly until the
hooks are no longer mounted on the pivot rod. Remove
the grass bag.
3. Empty the grass from the grass bag.
4. Tomount the grass bag on the mower, see "Mounting
The GrassBag".
Figure 7: Mounting thegrass bag