User Manual

SECTION 3 - OPERATING INSTRUCTIONS

3.11 ADJUSTING BLADE ON CUTTER

SPINDLE (Continued)

CUTTER SPACERS

HOUSING t!l_ _ ON TOP

_......--,

PULLEY ._... ,....,,,.,,,,,,....._

CUTTER

I r" HOUSING

BLAOl f

_1 SPACERS ON

BOTTOM

FIGURE 3.14

3.12 ADJUSTING FIXED DECK ATTACHMENT

The mower deck has four different positions for attaching

it to the power unit. The lowest setting provides a cutting

height range of 1-1/2" to 2-1/2", the middle low cut is 2-

1/4" to 3-1/4", the middle high cut is 3" to 4", and highest

cut is 3-3/4" to 4-3/4". Make sure the spacers on the

caster wheels are moved up or down as shown to

correspond with the bolt )ositions to keep deck level.

Once a desired cutting height is reached, attach the

mower deck to the power unit by installing 3 bolts on

each side in selected height of cut holes. Tighten bolts to

70 to 80 foot pounds torque. See Illustration.

SIDE PROFILE OF UNIT

BLACK DOTS

REPRESENT

POWER

BOLT ANCHOR

UNIT _ HOLES

• REAR

FIGURE 3,15A: LOW CUT 1-1/2" TO 2-1/2"

FIGURE 3.15B: MIDDLE LOW CUT 2-1/4" TO 3-1/4"

SPACERS

FIGURE 3.15C: MIDDLE HIGH CUT 3" TO 4"

SPACERS

FIGURE 3.15D: HIGH CUT 3-3/4" TO 4-3/4"

FIGURES 3.15C-D

FIGURES 3.15A-B