Installation Guide

WARNINGS
- Door is extremely heavy and could severely injure or kill if
dropped or allowed to fall prior to installation.
Tools/Material Included
- Vault Door
- 5/16” x 3” Lag Screws (10 included)
- ½” Drive Socket
- Socket Wrench
Tools/Material Needed
- Plastic Shims
- 4’ or longer level
- Square
- Drill
- ¼” Drill Bit
- Pry Bar (optional)
- Two 2x4 boards 6” wider than door (optional)
● Open packaging and inspect contents
● Check Rough Opening (RO)
o Measure width and height of RO